PC Components - The PC becomes a more important role in the automation world. It is not only used for visualization purposes as Human Machine Interface (HMI) with our Siemens WinCC or ProTool Pro software but also used for PC based automation like our WinAC solution. Siemens¡¯ communications processors for PROFIBUS offer the following advantages:
- CPs for PCI or PCMCIA format for stationary PC solutions as well as portable Laptops solutions
- CPs with their own microprocessor that off-loads the central CPU from processing
- Supporting of real-time operating systems like Windows RTX
- All Siemens PROFIBUS PC cards support PROFIBUS transmission speeds up to 12 Mbit/s.
- Easy integration into system environments through open and standardized interfaces, such as OPC servers.
- High performance cards with its own processor for PROFIBUS DP – for PC- based control, Numeric control, Robot control applications
- Human Machine Interfaces (HMI) using more than 8 connections
- Multi-protocol operation – e.g. PROFIBUS DP and S7 communication to SIMATIC S7
- Use of several communication processors (CPs) in one computer
- As PC interface providing integrated fiber optic interface (Dan, please link to fiber optic to the machine)
|
- PCI card with microprocessor for interfacing the PC to PROFIBUS
- Extensive diagnostic facilities for installation, commissioning and operation
- High performance through via direct access to the dual port RAM
- Consistent DP slave data during a DP cycle – 244 Byte input and 244 byte output data per slave
- Event and filter mechanism for relieving the host CPU
- Short response time with Fast Logic functionality – logic on the card
- High temperature industrial environmentwithout fan: +5¡ÆC to + 40¡ÆCWith fan (0.5 m/s): +5¡ÆC to + 60¡ÆC
- Development kit DK-5613 to integrate CP 5613 / CP 5614 in other, not Windows operating systems
- CP with integrated fiber optic interface – CP 5613 FO to support the concept Fiber optic to the machine
|
- CP 5614 is the CP 5613 with additional circuit board for the DP slave functionality
- Only one PC slot is required for a DP master and DP slave
- ¡®Transfer software¡¯ available for an easy data exchange between DP master and DP slave interface
- 44 Byte input and 244 Byte output data on the DP slave interface
- CP 5614 FO – with the configuration software the fiber optic interface can be switched to be the DP master or the DP slave interface
|
- For configuration tools likeSTEP7
- For portable PROFIBUS diagnostic stations with for example STEP7 or COM PROFIBUS
- PC as PROFIBUS DP slave device
- PROFIBUS system with maximum of 8 connections
- Mono-protocol mode – only S7 communications to SIMATIC S7 etc.
|
- PCI card for interfacing the PC to PROFIBUS
|
CP 5511
- PCMCIA card for interfacing the PC/notebooks to PROFIBUS
- PCMCIA card type II for Cardbus (16 bit)
CP5512: - PREFERRED
- PCMCIA card for interfacing the PC/notebooks to PROFIBUS
- PCMCIA card type II for Cardbus (32 bit)
- With STEP7 V5.2:
For Windows 2000 Professional + SP1/SP2/SP3 Workstation; Server and Windows XP Professional + SP1With SIMATIC NET PC software driver: Windows XP Professional + SP1
|
Performance data of the PROFIBUS CPs:
Number of connectable DP slaves max. |
122 |
122 |
60 |
<=32©ø |
<=32©ø |
Bytes of input and Bytes of output data as DP Slave |
- |
244 |
122* |
122* |
122* |
Number of parallel FDL tasks to be processed max. |
120 |
120 |
100 |
32 |
32 |
Number of PG/OP andS7 connections max. |
50©ö |
50©ö |
8 |
8 |
8 |
Number of FMS connections max. |
40©÷ |
40©÷ |
- |
- |
- | |
1) For credit = 1; PDU size <=480 byte
2) For credit = 1
3) Dependent on available memory in the adapter area of the notebook
*) Using the software SIMATIC NET Softnet DP Slave